300M, Concorde, LHS, New Yorker Discuss the Chrysler LH platform cars within.

'99 300M front end rattle

Thread Tools
 
Search this Thread
 
  #1  
Old 12-16-2008 | 12:54 PM
steve392's Avatar
Thread Starter
Joined: Dec 2008
Posts: 1
Default '99 300M front end rattle

I have a '99 Chrysler 300M since new with over 150,000 miles so far...I have noticed lately that there is a rattle (clunk) in the front end, usually whenever I hit a bump, sometimes if one wheel hits a bump and another doesn't. Anyway, doing a few searches and came up a listing of a TSB # 190100 that may apply. However finding that actual TSB has proven difficult. The struts are brand new, the steering tie rod ends have been replaced, and the stering itself is tight with no indication that is steering related. I'm thinking sway bar, links, maybe lower suspension arm and ball joint. Any help or direction would be appreciated, thanks....

Steve
 
  #2  
Old 12-21-2008 | 08:45 PM
toolmaker's Avatar
Joined: Nov 2008
Posts: 3
Default RE: '99 300M front end rattle

This sounds like the front end sway bar end links.I have had this on my 2002 Concorde LXI. It is an easy fix. here is a link for a good brand of links. The moog brand is a little better but more expensive.[/align][/align][/align]http://www.autopartswarehouse.com/details/QQChryslerQQ300MQQMoogQQSway_Bar_Link_KitQQ1999200 4QQMOK7342.html[/align]
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rtp
Chrysler Pacifica
13
05-25-2024 08:40 PM
rbar123
Chrysler Pacifica
5
03-25-2024 07:50 PM
funjon1
General Tech
2
10-07-2009 09:52 PM
mwlail1
Chrysler Voyager & Town & Country
1
12-02-2007 11:00 PM
gxs0lvi
Archive - 'Wanted' Classifieds
0
11-07-2006 09:10 PM




All times are GMT -5. The time now is 05:41 AM.