2005 Chrysler 300 frontend conv. Magnum, Suicide doors, Shaker Hood, Shaved Gas Door
#1
07-07-2015 | 04:18 PM
Thread Starter
|
Junior Member
Joined: Jul 2015
Posts: 6
2005 Chrysler 300 frontend conv. Magnum, Suicide doors, Shaker Hood, Shaved Gas Door
50+ PHOTOS BELOW
CLICK HERE
(Photos may appear blurry, wait a few seconds for them to clear to High Resolution)
2005 Dodge Magnum Custom
The last of the POWER WAGONS!
This Dodge Magnum has a 5.7 L Hemi V8, which stock, as you all know has The "Multi-Displacement System" which delivers great city mileage by running on only 4 cylinders when the full 8 are not needed. The transition between 4-8 cylinders is seamless, these cars can lay down the Power quick!
The car also comes with Diamler's "Slap Stick transmission" from Mercedes.
The car has 65,800 km on the odometer, the equivalent to 40,900 miles.
The ton of subtle Custom touches were performed approximately 3 years ago, after which the car was taken off the road and stored.
It is time for someone to properly enjoy this car, as I unfortunetly can never find the time.
I am selling this Custom at a HUGE loss, my selling price does not even cover HALF the costs of all the customwork and fabrication performed, let alone for the cost of the vehicle itself!
A testament to the workmanship at which no expense was spared, is the fact that in years since the rear doors were rehung "suicide" style and they have not began to hang or sag even more than a millimetre since installation. These doors alone were done at a cost of $13,000.
A list of Custom Fab and work is as Follows:
A list of factory options include:
(In the video the taillight appears to bounce back, however this can be controlled and prevented by the Remote Control, unfortunately I did not for the Video. As well the taillight will not bounce about
when driving, the Electric motor keeps the taillight closed and tight)
I am asking US $36,000 I am open to ALL serious offers
The Car is located on Toronto, ON Canada
For Importing the truck to the States
U.S. customs 1-877-CBP-5511
The buyer is responsible for shipping, I will assist wherever I can
Feel free to contact me regarding any questions you may have.
CLICK HERE
(Photos may appear blurry, wait a few seconds for them to clear to High Resolution)
2005 Dodge Magnum Custom
The last of the POWER WAGONS!
This Dodge Magnum has a 5.7 L Hemi V8, which stock, as you all know has The "Multi-Displacement System" which delivers great city mileage by running on only 4 cylinders when the full 8 are not needed. The transition between 4-8 cylinders is seamless, these cars can lay down the Power quick!
The car also comes with Diamler's "Slap Stick transmission" from Mercedes.
The car has 65,800 km on the odometer, the equivalent to 40,900 miles.
The ton of subtle Custom touches were performed approximately 3 years ago, after which the car was taken off the road and stored.
It is time for someone to properly enjoy this car, as I unfortunetly can never find the time.
I am selling this Custom at a HUGE loss, my selling price does not even cover HALF the costs of all the customwork and fabrication performed, let alone for the cost of the vehicle itself!
A testament to the workmanship at which no expense was spared, is the fact that in years since the rear doors were rehung "suicide" style and they have not began to hang or sag even more than a millimetre since installation. These doors alone were done at a cost of $13,000.
A list of Custom Fab and work is as Follows:
-Suicide rear passenger doors with T6061 billet Aluminum single hinges (manual door release inside, the side of the rear doors)-PICTURED
-Shaved door handles with remote poppers (hidden backup manual release under windshield rubber valence, in front of driver's door)-PICTURED
-Lower window door mouldings removed and filled with metal, further cleaning up the door profile
-Rear side windows (located behind the rear passenger doors) were lowered from the roof line down, to follow the angle or arc of the rear-door window line.
-Shaved gas door, new locking gas cap located behind drivers side taillight
-Shaved rear deck-lid handle, emblems and wiper-arm
-Shaved body emblems and side door mouldings
-Functioning "SHAKER" hood, custom moulded
-Front end 300C conversion, with SRT8 front bumper fitted with custom flex-rubber front lip
-Custom "HALO" headlights, tinted side marker lights
-Custom fine black mesh grill
-SRT8 rear bumper
-Custom LED taillights
-300c OEM side skirts
-Custom "HURST" shifter with milled gear indicator plate
-Moulded floor mats and cargo mats
-Tinted windows
-Two-toned Flat black
-Lowered 2 inches with Eibach sport line series springs
-Shaved door handles with remote poppers (hidden backup manual release under windshield rubber valence, in front of driver's door)-PICTURED
-Lower window door mouldings removed and filled with metal, further cleaning up the door profile
-Rear side windows (located behind the rear passenger doors) were lowered from the roof line down, to follow the angle or arc of the rear-door window line.
-Shaved gas door, new locking gas cap located behind drivers side taillight
-Shaved rear deck-lid handle, emblems and wiper-arm
-Shaved body emblems and side door mouldings
-Functioning "SHAKER" hood, custom moulded
-Front end 300C conversion, with SRT8 front bumper fitted with custom flex-rubber front lip
-Custom "HALO" headlights, tinted side marker lights
-Custom fine black mesh grill
-SRT8 rear bumper
-Custom LED taillights
-300c OEM side skirts
-Custom "HURST" shifter with milled gear indicator plate
-Moulded floor mats and cargo mats
-Tinted windows
-Two-toned Flat black
-Lowered 2 inches with Eibach sport line series springs
A list of factory options include:
-Heated seats
-Leather interior
-R/T rims
-Steering wheel Audio controls and Cruise control
-A/C
-CD player
-Power locks and windows
-Keyless entry
-Trip computer
-Universal integrated garage door opener
-Cargo area security cover
-Leather interior
-R/T rims
-Steering wheel Audio controls and Cruise control
-A/C
-CD player
-Power locks and windows
-Keyless entry
-Trip computer
-Universal integrated garage door opener
-Cargo area security cover
(In the video the taillight appears to bounce back, however this can be controlled and prevented by the Remote Control, unfortunately I did not for the Video. As well the taillight will not bounce about
when driving, the Electric motor keeps the taillight closed and tight)
I am asking US $36,000 I am open to ALL serious offers
The Car is located on Toronto, ON Canada
For Importing the truck to the States
U.S. customs 1-877-CBP-5511
The buyer is responsible for shipping, I will assist wherever I can
Feel free to contact me regarding any questions you may have.
[URL=http://s865.photobucket.com/user/kmsf100/media/Mag/1743_zpse7hwatrr.jpg.html]
Last edited by kmsf100; 08-20-2016 at 12:42 PM.
#4
07-12-2015 | 07:21 PM
Thread Starter
|
Junior Member
Joined: Jul 2015
Posts: 6
Open to ALL offers!
#5
07-12-2015 | 08:56 PM
Senior Member
Joined: Sep 2014
Posts: 417
From: Dallas, TX
You have a beautiful ride there. You've put some hard work in to it too. Love the subtle yet unique mods you've done. Especially the hidden gas cap, shaker hood and suicide doors. Always thought about doing the suicide door idea on my Accord. Good luck with sale.
#6
07-18-2015 | 11:48 AM
Thread Starter
|
Junior Member
Joined: Jul 2015
Posts: 6
You have a beautiful ride there. You've put some hard work in to it too. Love the subtle yet unique mods you've done. Especially the hidden gas cap, shaker hood and suicide doors. Always thought about doing the suicide door idea on my Accord. Good luck with sale.
is really nice and easy in comparison to before. If you can I say go for it for sure !!
Thread
Thread Starter
Forum
Replies
Last Post
nickstoyz
Chrysler Voyager & Town & Country
16
02-07-2015 01:15 PM
mike300
Archive - For Sale / Trade Classifieds
0
05-20-2013 09:25 AM
Chrysler Forum Editor
Brand News, Concepts & Rumors
0
09-21-2012 01:48 PM
cpracing
Chrysler 300, 300C & 300C SRT-8
2
02-07-2006 03:20 PM