If you can fix yours, then go for it, but they are interchangeable... It's the same gauge package, but they are right about having to have the same transmission setup

 

I found a technical breakdown on how to fix the cluster on yahoo.It`s great,it shows step by step on how to remove the dash cover,take cluster apart,which resistors to solder,and putting it back together.I went ahead and followed the steps,now all I have to do is install it and hope it works. Thanks for all your help and support.

 

This is for dusterdan and jxi101, Just to let you guys know I fixed my dash cluster.Thanks to both of you for opening different ideas for me to try. Now I have other issues with the car(97 sebring conv.)#1-When turning the wheel either left or right not moving,I hear a slight thump noise in the front end,only when turning the wheel.I had a couple of so called mechanics look at it ,they told me that either the lower control arm bushings were bad,or the front and rear motor mounts were bad.Well I replaced them,the front & rear motor mounts & the lower control arm bushings(just one on each side) and guess what,That`s right the noise is still there.Any clue is to what it could be before I empty my bank account?#2-I have the stock radio(am/fmcass)The volume is up all the way,I cannot lower the volume,I turn the **** but it keeps turning like It`s stripped. Any info On that issue? Thx