2004 Crossfire Shift Knob
#1
11-11-2005 | 06:01 PM
Thread Starter
Joined: Nov 2005
Posts: 4
2004 Crossfire Shift ****
I decided to replace the OEM Shift **** with an after market MOMO shift **** and can not remove the factory one. I have lifted the boot upward and unseated the black plastic fastner but from that point on I am lost. Can anyone help?
#2
11-15-2005 | 08:11 PM
Joined: Nov 2005
Posts: 39
From:
RE: 2004 Crossfire Shift ****
From Service Manual:
Lift the shift boot to expose the retainer nut.
Rotate the retainer nut clockwise and down to remove the shift handle (****).
Pull straight up on the handle (****).
I understand you have to pull your guts out to get it off. Reverse the procedure to install. Good luck.
Lift the shift boot to expose the retainer nut.
Rotate the retainer nut clockwise and down to remove the shift handle (****).
Pull straight up on the handle (****).
I understand you have to pull your guts out to get it off. Reverse the procedure to install. Good luck.
Thread
Thread Starter
Forum
Replies
Last Post
parcou
Chrysler 300, 300C & 300C SRT-8
0
02-08-2007 10:32 PM
