ac electrical problem
#1
ac electrical problem
im working on a 03 t/c i cant get the comp to kick on i used my power probe and put power thru at the relay and nothing. went down to the comp put power to it and it kicked in .my pressures are 60 on the low side and 40 on the high side. could the pressure switch be bad or something else?? thanks ronny
btw i dont think the a/c has worked in a couple years
btw i dont think the a/c has worked in a couple years
#4
jumped them and comp came on low side went down to 5 tried to add freon and low side went to100 and high side went to 300 turned every thing off . do iguess i have a blockage should a new dryer and exspansion .valve cure it or is there a orfice tube in there . thanks
#5
Does the fan work?????
Its an Expansion Valve...But Doubtful that you are BLOCKED UP......
Hi low side and High Hi side are an Indication of eiter Overcharged, or...Excessive pressure in the condenser from lack of heat dispersion. If the fan functions properly spray the condenser with a garden hose and see if that helps..if it does, CLEAN THE BUGS and Straighten the fins.
Its an Expansion Valve...But Doubtful that you are BLOCKED UP......
Hi low side and High Hi side are an Indication of eiter Overcharged, or...Excessive pressure in the condenser from lack of heat dispersion. If the fan functions properly spray the condenser with a garden hose and see if that helps..if it does, CLEAN THE BUGS and Straighten the fins.
Last edited by Djinn-n-Tonic; 06-11-2011 at 06:36 PM.
#7
Thats where the High pressures are coming from.......
You have to get the fan to work. Start the car and unplug the coolant temperature sensor, that will default the computer to "fan on" or "fan command". See if the fans come on with the sensor unplugged.
You have to get the fan to work. Start the car and unplug the coolant temperature sensor, that will default the computer to "fan on" or "fan command". See if the fans come on with the sensor unplugged.
#9
i couldnt unplug the cts so i just ran the van till they came on . they came on at 220 and kicked out at 210 where is the relay for the fans it is not marked in the relay box .also it popped a p1491 code after i guess messing around with the fan plugs?