General Tech Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.

1996 Concorde 3.5L PCM failures

Thread Tools
 
Search this Thread
 
  #1  
Old 01-29-2007 | 11:19 AM
ETD66SS's Avatar
Thread Starter
|
Junior Member
Joined: Jun 2005
Posts: 14
Default 1996 Concorde 3.5L PCM failures

My GF's car, the PCM has been replaced by a dealership twice, yet again the car worked for a few months and now will not start.

Why does the dealer keep replacing the PCM, what is making the PCM fail?

The car runs great, then all of a sudden won't start...

According to the last bill from the dealer, they were getting an incorrect response from the PCM and that's why they replaced it... CEL is never on when this happens...

I really need to understand this so I can bust the dealers ***** a bit andfigure outwhy they can't get this right...
 
  #2  
Old 01-29-2007 | 11:39 AM
CHRYSLER TECH's Avatar
Super Moderator
Joined: Mar 2006
Posts: 8,891
From: Norcross GA
Default RE: 1996 Concorde 3.5L PCM failures

well if they had to replace the pcm again u said after 3 months thne it wont cost u a thing correct?? It will be a 12 /12 warranty. Now the causes no one but the tech that replaced it or possably the service advisor will know that. There can be several things that will make a pcm drop out ant aftermarket systems installed??
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ruger1944
Chrysler Voyager & Town & Country
10
03-25-2015 04:14 PM
zubaroo
Chrysler Voyager & Town & Country
2
06-26-2012 08:02 PM
indianajim
300M, Concorde, LHS, New Yorker
1
04-08-2011 05:42 PM
scooter
General Tech
7
09-16-2007 12:48 PM
ETD66SS
300M, Concorde, LHS, New Yorker
0
08-14-2006 04:36 PM




All times are GMT -5. The time now is 04:23 AM.